CO2 & 1570 nm laser · Potts Point, Sydney

Alma Hybrid Laser in Sydney

Two lasers. One session. Set to your skin.

The Alma Hybrid pairs a fractional CO2 laser, which renews the surface, with a 1570 nm laser that rebuilds the collagen beneath it. Used together as Hybrid Lift, lightly as PixelPeel, or on its own as SoftLift, with a protocol for scars. Texture, sun damage, lines, scars and early laxity, at a depth and a downtime chosen for you. At Cleon in Potts Point, every setting is chosen for your skin, in a doctor-led clinic.

  • Alma Hybrid laser Sydney
  • CO2 laser resurfacing
  • Fractional laser
  • Laser for acne scars
  • Sun damage laser
  • Potts Point laser clinic
Profile of a smiling woman with her eyes closed, touching her chin

Lasers
CO2 + 1570 nm
Downtime
Hours to 2 weeks
Usual course
1–3 treatments
Full result
3–6 months
In-clinic consultation
$100

Alma Hybrid laser · ARTG listed · ARTG ID 321320

Watch: What the Alma Hybrid involves


How it works

How does the Alma Hybrid Laser improve skin quality?

Most lasers do one job. The Alma Hybrid carries two in one scanner, so the surface and the layer beneath it can be treated in the same session, in whatever ratio your skin needs.

In short

The Alma Hybrid is a dual-wavelength laser that combines an ablative, fractional CO2 laser (10,600 nm) with a non-ablative 1570 nm laser. The CO2 laser removes microscopic columns of the surface, so new skin forms with better texture and tone. The 1570 nm laser heats the dermis without breaking the surface, so new collagen and elastin form over the following months. Used together, the treatment is called Hybrid Lift; the CO2 laser used lightly is PixelPeel; the 1570 nm laser on its own is SoftLift; and a dedicated fractional pattern remodels scars. Downtime runs from a few hours to about two weeks depending on the protocol, most people need one to three treatments, and the full result shows at three to six months.

How the Alma Hybrid works, at the surface and beneath it A cross-section of skin. Narrow channels marked 1 open the surface where the CO2 laser has removed microscopic columns of the epidermis. Deeper columns of heat marked 2 sit in the dermis, placed by the 1570 nanometre laser, with untouched skin between them. Around them, marked 3, new collagen and elastin form over the following months. 123 EpidermisRenewed by CO2 DermisCollagen & elastin CO2 10,600 nm + 1570 nm · fractional
  • The surface, renewed

    CO2 · ablative

    The CO2 laser removes damaged skin in a controlled, fractional pattern: microscopic columns, with untouched skin between them. New skin forms as the surface heals, with better texture, tone and radiance, fewer fine lines and less sun damage. This is what ‘skin resurfacing’ means.

    • Texture
    • Sun damage
    • Scars
  • The layer beneath, rebuilt

    1570 nm · non-ablative

    The 1570 nm laser passes through the surface and heats columns in the dermis. Nothing is removed. Over the following weeks and months, new collagen and elastin form, so the skin becomes firmer and denser and fine lines and mild laxity improve from within.

    • Firmness
    • Fine lines
    • Density
  • Both, in one pass

    The ratio is yours

    Most lasers do one or the other. The Hybrid does both in a single session, and the ratio of each is set for your concern and how much downtime you can take. Four ways to use it: Hybrid Lift, both lasers together, for the fullest result with a planned recovery; PixelPeel, a light CO2 resurfacing with a few days of flaking; SoftLift, the 1570 nm laser on its own, with hours of downtime; and a scar revision protocol with its own fractional pattern.

    • Hybrid Lift
    • PixelPeel
    • SoftLift
    • Scar revision

What it addresses

What skin concerns does the Alma Hybrid address?

Surface quality and the collagen beneath it. Which protocol, how deep and how many sessions depends on the concern, your skin type and the recovery you can realistically take.

Texture & radiance

Surface renewal with the CO2 laser. Smoother texture, more even tone, finer-looking pores and more radiance. One of the most visible and earliest results of laser treatment.

Sun damage & pigmentation

Ablative CO2 laser has good evidence for sun-damaged skin, including the rough, pre-cancerous patches that come with it. It removes the damaged surface layers and prompts new, healthier skin to form, and sheds pigment-laden cells for a more even tone. Any spot that looks unusual is checked by a doctor before it’s treated.

Lines & early laxity

The 1570 nm laser builds new collagen for fine lines and mild to moderate laxity. Results build over months. It firms and thickens the skin; it isn’t a surgical lift.

Acne & surgical scars

A specific fractional pattern remodels scar tissue: acne scars, surgical scars and uneven, textured scarring. Results develop over several months and usually take more than one session.

Around the eyes

The skin around the eyes is one of the areas where laser makes the most difference. Fine lines, crepey skin and surface quality can all be treated with the right settings, with the eye itself protected throughout.

Full-face renewal

For the biggest change in surface quality, a full-face resurfacing protocol renews texture, tone and quality in one planned recovery window. The downtime is real, and we tell you exactly what to expect.

Is this right for me?

Am I suited to the Alma Hybrid Laser?

This might suit you if

  • Your skin’s texture, tone or surface quality is bothering you
  • You have sun damage, uneven pigmentation or patchy skin
  • You have fine lines, early laxity, or acne or surgical scarring you’d like to improve
  • You can plan around a recovery period if your protocol needs one, and commit to SPF every day

Worth discussing in consultation first

  • Your skin is darker. Not every laser setting suits every skin type, and the risk of pigment change is higher, so this needs careful assessment
  • You have an active skin condition in the area, such as a rosacea flare, infection or cold sore. It needs to settle first, and if you get cold sores we plan for it
  • You’ve had a lot of sun recently, you’re pregnant or breastfeeding, or you’ve taken isotretinoin (Roaccutane) in the last year
  • You take medicines that affect skin healing or sensitivity to light, or you scar easily or form raised (keloid) scars

The Alma Hybrid laser, black with a glowing copper base, its touchscreen showing the Alma Hybrid welcome screen

The device

Why the Alma Hybrid?

One scanner, two lasers: a CO2 laser for the surface and a 1570 nm fibre laser for the layer beneath. The same device at different settings gives very different results, which is the point.

  • Both depths, one session. Surface renewal and deep collagen stimulation together, with the ratio of each adjusted for you.
  • Four protocols on one platform. Hybrid Lift, PixelPeel, SoftLift and scar revision, so the plan can step up or down as your skin needs.
  • Downtime you choose. From a few hours to about two weeks. The stronger the setting, the bigger the change and the longer the recovery, and we tell you exactly what to expect.

Cleon is a doctor-led clinic. SoftLift and PixelPeel are planned and performed by our dermal therapist. Hybrid Lift and scar revision, the deeper CO2 treatments, are planned and performed by our founder, Dr Brandon. Every plan is overseen by a doctor, and your progress is reviewed. Results are monitored, not assumed.

Results

Before & After

Real Cleon patients, treated with CO2 laser on the Alma Hybrid. Results vary: yours depend on your skin type, the concern treated and the protocol chosen.

Before and after CO2 laser on a man's forehead: horizontal forehead lines above, smoother skin below

Forehead linesCO2 laser · Alma Hybrid · before above, after below
Before and after Alma Hybrid laser on a woman's face: uneven texture and pigmentation on the left, smoother, more even skin on the right

Texture & pigmentationCO2 laser · Alma Hybrid
Before and after full-face CO2 resurfacing on an older woman: deep lines and sun damage on the left, fewer lines and more even skin on the right

Deep lines & sun damageFull-face CO2 resurfacing · Alma Hybrid
Before and after laser on a young man's face: marks and uneven skin on the cheek on the left, clearer, smoother skin on the right

Texture & marksCO2 laser · Alma Hybrid

Results vary between individuals and depend on your skin, the concern and the protocol. Images have not been altered by Cleon. What’s realistic for your skin is a conversation for your consultation.

What to expect

What is recovery like after CO2 laser?

One patient’s recovery after a full-face Hybrid Lift, day by day. Downtime varies by protocol: a more intensive setting gives a bigger result and needs more recovery, and we tell you exactly what to expect before you book.

  1. Two days after Alma Hybrid laser: the treated skin is red with a fine grid pattern across the face
    Days 1–2

    Heat and redness

    Treated skin feels warm and looks red, with the fractional grid visible. Possible mild swelling. Keep it cool and moisturised.

  2. Five days after treatment: the skin is peeling and the grid pattern is fading
    Days 3–5

    Peeling begins

    The treated layer starts to shed. Don’t pick or disturb the peeling; it’s part of the healing.

  3. Nine days after treatment: peeling has finished and the skin is pink and smooth
    Days 5–7

    Peeling complete

    Most peeling has resolved. Skin looks pink and noticeably smoother. SPF is essential from this point.

  4. Thirteen days after treatment: the redness has faded and the skin looks even
    Week 2

    Skin normalises

    Redness fades and the skin settles. The surface result is clearly visible.

  5. Two to six months after treatment: smooth, even skin as collagen builds
    Months 2–6

    Collagen builds

    Collagen remodelling continues for months. Results keep improving, with the fullest result at three to six months.

A full Hybrid Lift usually means 5 to 14 days of downtime. PixelPeel is a few days of redness and light flaking. SoftLift is a few hours. Photos shared with the patient’s permission.

Pricing

How much does Alma Hybrid laser treatment cost in Sydney?

Hybrid Lift and scar revision depend on the area and the depth, so they’re priced at your consultation. PixelPeel and SoftLift have set prices, per session or as a course. An in-clinic consultation is $100, and it comes off your treatment.

  • Hybrid Lift

    CO2 and 1570 nm together. The fullest result, with a planned recovery of about 5 to 14 days. Full face, or an area. Usually 1 to 3 treatments.Priced at your consultation, by area and depth.

    Ask us

  • PixelPeel, face

    Light fractional CO2 resurfacing. A few days of redness and flaking. Often a course through the year. More on PixelPeel.Course of 4: $2,250

    $800

  • PixelPeel, face & neck

    The full face and the neck together in one session.Course of 4: $3,000

    $999

  • SoftLift, face or neck

    The 1570 nm laser on its own. Hours of downtime. Usually a course of three, a month apart. More on SoftLift.

    $750

  • SoftLift, face & neck

    The full face and the neck together in one session.

    $1,100

  • Scar revision

    A dedicated fractional protocol for acne, surgical and textured scars. Usually more than one session.

    Ask us

There’s no Medicare rebate for cosmetic laser. Laser treatment often sits inside a wider Skin Quality plan; the consultation comes first, so the protocol and the number of sessions fit your skin.

All pricing

The process

How does Alma Hybrid laser treatment work, from consultation to result?

The steps are the same for everyone. The protocol is yours.

  1. Consultation

    We look at your skin, your history and how much downtime you can take, then set the protocol. A test patch may be suggested for deeper skin tones. Not sure where to start? That’s what the consultation is for.

  2. Preparation

    No tanning or sunburn for two to four weeks before. Some skincare and medicines pause, and if you get cold sores we plan for it. You’ll have a written pre-treatment plan.

  3. Treatment day

    Your skin is cleansed and numbed, and eye shields go on. The scanner moves across the area in a set pattern; you’ll feel heat. As a doctor-led clinic, we can use medical-grade anaesthesia and other measures to keep you comfortable.

  4. Recovery

    Heat and redness first, then peeling, then pink new skin. Cool, moisturise and protect. Most Hybrid Lift patients are back to normal within about two weeks; PixelPeel in days; SoftLift in hours.

  5. Review

    Your progress is reviewed, not assumed. If a second or third treatment is part of your plan, it’s timed once the skin has settled.

  6. Months three to six

    The surface result shows as the skin heals. Collagen keeps building for months, so the full result is best judged at three to six months.

How it compares

Hybrid Lift, PixelPeel or SoftLift: what’s the difference?

All three run on the same Alma Hybrid. What changes is the laser used, how deep it works, and how long you need to recover.

Hybrid Lift compared with PixelPeel and SoftLift on the Alma Hybrid laser
Measure Hybrid Lift PixelPeel SoftLift
Laser CO2 and 1570 nm together Light fractional CO2 1570 nm only, non-ablative
The surface Resurfaced Lightly renewed Left intact
Works on Both: deeper lines, sun damage, laxity, scars The surface: texture, pores, dullness, mild pigment Collagen beneath: firmness, fine lines, crepey skin
Typical downtime About 5 to 14 days A few days of redness and light flaking Hours. Back to normal the same or next day
Typical course 1 to 3 treatments A series, through the year Usually 3, about a month apart

Downtime and sessions depend on the settings chosen for your skin. We’ll recommend the one that fits, and sometimes it’s a combination. More on PixelPeel and SoftLift.

Frequently asked

Alma Hybrid laser in Sydney: your questions

Anything else, email hello@cleonclinic.com or call 0438 163 638.

What is the Alma Hybrid Laser?

The Alma Hybrid is a dual-wavelength laser that combines an ablative CO2 laser (10,600 nm) with a non-ablative 1570 nm laser. It can treat the surface, the deeper layer, or both at once, in a single session. It’s listed on the Australian Register of Therapeutic Goods (ARTG ID 321320).

What is CO2 laser resurfacing?

A CO2 laser removes microscopic columns of the skin’s surface in a controlled, fractional pattern. The skin heals from the untouched skin between the columns, and the new surface has better texture and tone, fewer lines and less sun damage. The healing response also builds collagen. It’s the strongest resurfacing tool we have, and the one with the most downtime.

What’s the difference between ablative and non-ablative laser?

An ablative laser, such as CO2, vaporises microscopic columns of the surface, so the skin has to grow it back and recovery takes days to two weeks. A non-ablative laser, such as the 1570 nm laser, passes through the surface and heats the layer beneath, so the skin repairs from the inside and recovery is measured in hours. The Alma Hybrid has both, and can use them together.

What’s the difference between Hybrid Lift, SoftLift and PixelPeel?

All three run on the Alma Hybrid. Hybrid Lift uses the CO2 and 1570 nm lasers together: the surface is resurfaced and the deeper layer is treated, with about 5 to 14 days of recovery. PixelPeel is a light fractional CO2 resurfacing with a few days of redness and flaking. SoftLift uses the 1570 nm laser alone, leaves the surface intact and has hours of downtime.

How many laser sessions will I need?

It depends on the concern and the depth of treatment. A Hybrid Lift is often one to three treatments. SoftLift is usually a course of three, about a month apart. Scars take more than one session. We’ll give you a realistic plan at the consultation, not a standard number.

What is the downtime after CO2 laser?

CO2 treatments usually mean 5 to 14 days of downtime, depending on how strong the settings are and how they’re tailored to your life and goals. PixelPeel, a lighter CO2 setting, is a few days of redness and flaking. The non-ablative laser on its own, SoftLift, is a few hours. Settings, recovery and suitability are all gone through at the consultation.

Does laser treatment hurt?

Most patients describe a sensation of heat during the procedure. As a doctor-led clinic, we can use more effective medical-grade anaesthesia to optimise comfort, and can support you with additional measures to help you feel relaxed throughout your treatment.

Is laser safe for all skin types?

Not every laser suits every skin type. Darker skin needs careful assessment and specific settings, because the risk of pigment change after treatment is higher. We assess this before any protocol is agreed, and sometimes recommend a different treatment instead.

Can laser treat acne scarring?

Yes. Fractional laser is one of the most effective approaches for acne scarring. It creates controlled micro-channels in the scar tissue, which stimulates remodelling. Suitability and depth are assessed in consultation, and deep, pitted scars usually need a few sessions.

What is fractional laser treatment?

Fractional laser treats a fraction of the skin surface, leaving the surrounding skin intact. This allows significant collagen stimulation with a faster recovery than treating the whole surface.

What is the best laser treatment for pigmentation in Sydney?

It depends on the type and depth of the pigmentation. Light-based treatments suit superficial pigment and redness. CO2 and fractional laser reach deeper concerns, and resurfacing sheds pigment-laden cells for a more even tone. The consultation works out what’s right for your skin type and your pigmentation.

What is the difference between CO2 laser and BBL or IPL?

CO2 laser removes the skin surface and stimulates collagen through the healing that follows. BBL and IPL use broad-spectrum light to target pigment and redness without removing the surface. Different tools for different concerns.

Can the Alma Hybrid treat the neck, chest or hands?

Yes, with lighter settings. Skin off the face heals more slowly, so the neck, chest and hands are treated more conservatively than the face, often with SoftLift or a light CO2 setting. The right approach for each area is set at the consultation.

Can laser treat the skin around the eyes?

Yes. Fine lines, crepey skin and surface quality around the eyes respond well, and the area is one of the most common reasons people choose laser. Protective eye shields are worn throughout.

How long do laser results last?

Surface results are long-lasting with good sun protection. Collagen stimulation keeps improving over 3 to 6 months. How often you need a top-up depends on the concern and how your skin ages.

When will I see results?

The surface result shows as the skin heals, within a couple of weeks of a Hybrid Lift. Collagen keeps building for months, so the full result is best judged three to six months after treatment.

Can I have laser treatment in summer?

Laser-treated skin is more sensitive to the sun. Summer treatment needs diligent SPF and sun avoidance before and after, so we often plan deeper treatments for the cooler months. We’ll discuss timing at the consultation.

What should I do to prepare for laser treatment?

Avoid significant sun exposure for two to four weeks before. Some skincare and medicines need to pause, and if you get cold sores we plan for that. You’ll get a full pre-treatment protocol at the consultation.

Can I combine the Alma Hybrid with other treatments?

Yes, with the right spacing. LED light therapy is often used in the days after laser to support healing. Chemical peels, skin needling and PRP are spaced around it. We put the order together in your plan.

How much does Alma Hybrid laser treatment cost in Sydney?

Hybrid Lift and scar revision depend on the area and the depth, so they’re priced at your consultation. PixelPeel is $800 a session for the face or $999 for the face and neck, or $2,250 and $3,000 for a course of four. SoftLift, the 1570 nm laser on its own, is $750 for the face or neck and $1,100 for both. An in-clinic consultation is $100, which comes off your treatment. See our pricing for the full picture.

Does Medicare cover laser resurfacing?

No. Cosmetic laser treatment has no Medicare rebate, and private health insurance doesn’t cover it.

Is the Alma Hybrid ARTG listed?

Yes. The Alma Hybrid is listed on the Australian Register of Therapeutic Goods, ARTG ID 321320.

Is the Alma Hybrid suitable for men?

Yes. The settings are chosen for the skin in front of us, not the gender. Men’s skin treatments are also offered through Male by Cleon.

Who performs the laser treatment?

It depends on the treatment. SoftLift and PixelPeel are performed by our dermal therapist. Hybrid Lift and scar revision, the deeper CO2 treatments, are performed by a doctor. Cleon is a doctor-led clinic, and every plan is overseen by a doctor.

What is laser skin rejuvenation?

Laser skin rejuvenation means using a laser to improve overall skin quality: texture, tone, radiance and fine lines. It’s a broad term that covers different laser types, chosen for the specific concern.

Is there a laser clinic near me in Sydney?

Cleon by Dr Brandon is a doctor-led laser clinic at Ground 02, 46a Macleay Street, Potts Point, a short walk from Kings Cross station and close to Darlinghurst, Elizabeth Bay, Rushcutters Bay, Woolloomooloo and the eastern suburbs. CO2 laser, fractional laser, non-ablative laser and full laser resurfacing are all available on the Alma Hybrid. Online consultations are available for patients across Sydney.

Book a consultation

The consultation comes first.

Online, or face to face at our Potts Point clinic. We’ll tell you honestly which protocol suits your skin, and how much downtime it really needs. No treatment agenda.